Concrete Floor Screeding System
Underfloor Heating Commercial & Domestic


087 2190911
025 40909
area covered

Contact Us
  • Home
  • About Us
  • Contact Us
  • Floor Screed Types
  • Jobs Completed
  • Preparation & Application
  • Photo Gallery
  • Downloads
 

Floor Screed Type

Anhydrite Screed

Description : Anhydrite liquid floor screeds are a highly technical self levelling screed designed for use in domestic commercial and projects, which is particularly suitable for use with under floor heating floors and as a floating screed. Anhydrite floor screeds use a calcium sulphate binder.

Benefits:

  • There are many benefits to using an Anhydrite floor screed.
  • The screed is pumped in by our specialised pump, so no wheelbarrows or back breaking work needed.
  • The screed has no need for reinforcement and is self compacting plus high strength.
  • The screed can be placed at up to 20 times the rate at which basic concrete is applied.
  • The Anhydrite can be placed thinner than other screeds, because of its flexural strength.
  • The Anhydrite is a self levelling liquid floor which gives an excellent floor finish.
  • 6-7m³ can be poured in approximately 35 – 40 minutes
  • Minimal shrinkage or cracking
  • Low carbon footprint
  • Usually can carry foot traffic next day

NOTE : Anhydrite floor screeds are not recommended for exterior applications or interior areas that are continually exposed to water.

Anhydrite Technical Data Sheet

Cement Based Floor Screed

Description : This is a self levelling liquid floor screed with a cement based mix, designed for use in domestic commercial and projects, which is particularly suitable for use with under floor heating floors and as a floating screed. The screed incorporates polypropylene fibres, super plasticiser and a shrinkage inhibitor. An excellent smooth level floor finish is achieved, after which a curing agent is applied.

Benefits:

  • There are many benefits to using this type of floor screed.
  • The screed is pumped in by our specialised pump, so no wheelbarrows or back breaking work needed.
  • This is screed is more cost effective than other screeds.
  • It is quick clean and easy instalment.
  • Up to 1000m² approximately can be laid per day.
  • 6-7m³ can be poured in approximately 35 – 40 minutes
  • An excellent smooth level floor finish is achieved, which can receive timber, tile or carpet.
  • There is no maximum height to which the screed can be poured.
  • Once installed and set the product is unaffected by wetting.
  • Usually can carry foot traffic next day

Cement Based Technical Data Sheet

Anhydrite floor screed tech data
Cement floor screed tech data

Home |  About Us |  Contact Us |  Floor Screed Types |  Jobs Completed |  Preparation & Application |  Photo Gallery |  Downloads |  Areas Covered |  Sitemap

©Apollo Screed 2012